Buy The MetreSpeciality Non Adhesive Films

TSPP7 170µ SATIN POLYPROPYLENE TEAR RESISTANT FILM PP5

This 170µ / 130gsm semi rigid polypropylene film has good scratch and scuff resistance. Often used as a low cost, light, 1 part solution for roll-ups as it does not require lamination and hangs very flat with little edge curl. There is a silver backed fully opaque version in our range called TSOP7 and a self-adhesive version TSPP7SA. A more environmentally responsible alternative to other synthetics on the market. TSPP7 is a polypropylene banner material with resin identification code number 5. It only weighs 130 grammes per M2 so consumes fewer resources in the manufacturing stage and is easier to place in the recycling chain.

Available in 40M rolls in widths of 760mm, 914mm, 1067mm, 1371mm and 1524mm
Buy the metre: non-standard roll lengths are surcharged at 33%

TSFB5 135µ FRONT PRINT BACKLIT PET FILM

For internal or external backlit applications. A single-sided transparent rigid polyester film with a white matt solvent inkjet coating. The 135µ film has been engineered to optimise drying times, allowing the necessary heat to pass through the PET and help to dry the ink after printing. An excellent 'day and night' film with high optical density on the blacks. It is essential to ensure that the print is 100% dry before mounting or laminating. The recommended overlaminates are from our DigiGuard range.

Available in 30M rolls in widths of 760mm, 1371mm and 1524mm
Buy the metre: non-standard roll lengths are surcharged at 33%

UWP12 12MIL MATT WALLPAPER

UWP12 12mil matt wallpaper For customised interiors of offices, homes and retail outlets. UWP12 is a latex based printable wallpaper for solvent printing offering high print quality with minimum wet expansion. To protect the wallpaper prints from abrasion, dirt and moisture we would recommend the application of a Decorators Varnish, such as a clear acrylic coating. When pasting, a standard or heavy-duty starch based paste may be used. The wet expansion is limited making UWP12 slightly more difficult to hang than some standard wallpapers and care must be taken if papering on to a curved surface. As when hanging standard wallpaper, always check the suitability of the wall to accept pasting. Lamination of UWP12 is not recommended. See our guide for wall paper.

Available rolls include 1067mm x 23M
Buy the metre: non-standard roll lengths are surcharged at 33%