TSOP7 OPAQUE SATIN SYNTHETIC TEAR RESISTANT POLYPROPYLENE FILM - 1 PART SOLUTION FOR ROLL-UPS THAT DOES NOT REQUIRE LAMINATION
Fully opaque and our most scuff and scratch resistant 1 part solution for roll-up displays. It does not require lamination and hangs very flat with little edge curl. TSOP7 is also a more environmentally responsible alternative to existing 2 part options or using heavy-weight PVC banners. TSOP7 roll-up is an opaque backed polypropylene banner material with resin identification code number 5. It only weighs 130 grammes per M2 so a full graphic panel can weigh less than 1/4kg. This is 25% to 50% of the weight of alternatives so TSOP7 consumes fewer resources in the manufacturing stage and is easier to place in the recycling chain.
Before polypropylene was invented, the gaseous waste from oil such as propylene and ethylene were simply burned, because they were useless. Today, these gases are used to produce polypropylene, thus drastically reducing atmospheric pollution. The production process also eliminates the potential polluting of rivers, streams and lakes, due to the use of water in a closed cooling cycle.
TSOP7:
Reduces the amount of raw material required in the finished product.
Reduces the potential damage to the environment in the manufacturing process.
Reduces the carbon footprint required to ship the product.
Reduces the environmental impact upon disposal.
Available in 25M rolls in widths of 914mm, 1067mm, 1371mm and 1524mm or 100M x 914mm
Buy the metre: non-standard roll lengths are surcharged at 33%
TSFP6 125ยต FRONT PRINT POLYESTER FOR ROLL-UPS
TSFP6 is a matt, fully opaque and stable polyester with a light stop black back-coat that has been formulated solely for the quick, easy and economical production of pull-up displays. When used correctly with TV3-60 / TV5-70 / TP5-20 the finished roll-up will hang flat within 15 minutes.
Available in 30M rolls in widths of 914mm and 1067mm or 100M x 914mm
Buy the metre: non-standard roll lengths are surcharged at 33%