Speciality Banner Vinyls

TSME11 PVC COATED POLYESTER MESH WITH RELEASE LINER

A lower cost version of our stunning TSME10 mesh and now B1 fire rated. The release liner allows the product to be printed on all solvent printers. This warp knitted fabric is not quite as strong as the more expensive TSME10 but still has a high tensile strength of 550/600 N/2.5cm and a high tear strength of 250/180 N. The air flow is higher on this product than TSME10 due to the greater area of holes making it better in high winds. It can be welded or stitched.

Available in 30M rolls in widths of 1371mm, 1600mm and 2500mm
Buy the metre: non-standard roll lengths are surcharged at 33%

TSME10 B1 FIRE RATED PVC MESH WITH RELEASE LINER

This high quality 10oz / 350gsm mesh is knitted, not woven, for increased strength in all directions. It is also better for close-up viewing than others tested and the PVC holds the ink better than cheaper meshes on the market providing dense and vibrant prints. The release liner allows the mesh to be printed on all wide format solvent printers and is easy to remove. TSME10 is lightweight and very strong, with low wind resistance, making it easy to mount over large sail areas such as scaffolding.

TSME10 is the strongest mesh in our range with very high tensile strength of 650/750 N/2.5cm and very high tear strength of 300/300N. It can be welded or stitched and is fire rated to B1.

Available in 30M rolls in widths of 1371mm and 1600mm
Buy the metre: non-standard roll lengths are surcharged at 33%