Speciality Non-Adhesive:

TSFB8
200µ front print backlit PET film

For internal or external backlit applications.
Thicker and lower cost than its predecessor TSFB5.
TSFB8 is similar in thickness to the old Kodak Duratrans film for display transparencies. It is a single-sided transparent rigid polyester film with a white matt solvent inkjet coating.
The 200µ film has been engineered to optimise drying times, allowing the necessary heat to pass through the PET and help to dry the ink.

Available in 30M rolls in widths of 760mm, 1371mm and 1524mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.

For the complete list of our speciality non-adhesive films select the 'Speciality Non-Adhesive Films' link from the navigation menu on your left, or use the links below to see the other individual products within this category:

TSPP7 - a 170µ satin white, synthetic tear resistant film a more environmentally responsible alternative to other synthetics on the market with good scratch and scuff resistance. TSPP7 is often used as a low cost, light, one part solution for roll-ups as it does not require lamination and hangs very flat with little edge curl.