SIHL 3392 SyntiSOL Greyback (TSOP7) polypropylene roll up banners for pop-ups and pull-up displays is available to buy by the linear metre as well as in 30M and 100M rolls in various widths for large format printers.

Pop Up Banners and Roll Up Banner Media:

SIHL 3392 SyntiSOL Greyback (TSOP7)
TSOP7 is a PP5 rated, polypropylene banner with resin identification code 5.TSOP7 is a more environmentally concious product.TSOP7 opaque satin tear resistant PP film for pop-ups is suitable for printing with latex and solvent inks.
Opaque satin synthetic tear resistant polypropylene film
- One part solution for roll-ups
that does not require lamination

Fully opaque grey back and our most scuff and scratch resistant one part solution for roll up banner displays.

It does not require lamination and hangs very flat with little edge curl.

SIHL 3392 SyntiSOL Greyback (TSOP7) is also a more environmentally responsible alternative to existing two part options or using heavy-weight PVC banners.

Photo shows SIHL 3392 SyntiSOL Greyback (TSOP7) one part solution for roll-ups - the solvent printed graphic is being attached to the easy clips at the top of our Altona Two banner stand.SIHL 3392 SyntiSOL Greyback (TSOP7) roll-up is an opaque backed polypropylene banner material with resin identification code number 5.

It only weighs 130 grammes per M² so a full graphic panel can weigh less than 1/4kg. This is 25% to 50% of the weight of alternatives so SIHL 3392 SyntiSOL Greyback (TSOP7) consumes fewer resources in the manufacturing stage and is easier to place in the recycling chain.

Before polypropylene was invented, the gaseous waste from oil such as propylene and ethylene were simply burned, because they were useless.
Today, these gases are used to produce polypropylene, thus drastically reducing atmospheric pollution.
The production process also eliminates the potential polluting of rivers, streams and lakes, due to the use of water in a closed cooling cycle.

SIHL 3392 SyntiSOL Greyback (TSOP7):

  • Reduces the amount of raw material required in the finished product.
  • Reduces the potential damage to the environment in the manufacturing process.
  • Reduces the carbon footprint required to ship the product.
  • Reduces the environmental impact upon disposal.

» Technical Data Sheet.
» Prices and Roll Sizes.
» Request ICC media profile.

Available in 40M rolls in widths of 914mm, 1067mm, 1372mm and 1524mm.
Also available in 100M rolls in widths of 914mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.


For the complete list of our media for pop-up and roll-up materials select the 'Pop Up and Roll Up Banner Media' link from the navigation menu on your left, or use the links below to see the individual products within this category:

SIHL 3392 SyntiSOL Greyback (TSOP7) - a fully opaque grey back and our most scuff and scratch resistant one part solution for roll up banner displays.
SIHL 3629 SyntiSOL - a 170µ satin coated, tear resistant polypropylene film for roll-up and pop-up banners with a waterproof coating designed for solvent inks.
TSFP8 - a 200µ fully opaque and stable satin white polyester with built in light stop that is ideal for the production of roll-up displays. It hangs very flat with no distortion and little edge curl, plus good water and scuff resistance so can be used unlaminated.
TSPV9 - Textured white PVC/PET hybrid film with black light stop - an economical solution for fully opaque roll up and pull up displays that can be used unlaminated as product has good tear and scuff resistance.
SIHL 3408 DuraSOL Light - a 220µ satin finish rigid PVC film for roll-up displays that has good rigidity combined with good flatness and a low memory, wateriest, extremely tear resistant and superbly suited for use in various display and roll-up systems.
SIHL 3515 PolySOL Greyback (TSFP7) - a 180µ satin white, grey light stop opaque polyester media formulated solely for the quick, easy and economical production of pop-up displays, offering good scuff resistance.
SIHL 3508 DuraSOL Heavy 450 - a 430µ a satin coated white backed tear resistant rigid PVC film with a waterfast coating for solvent inks with good opacity and tear and scratch resistance. Due to its stiffness, the film is suitable for rigid displays and pop-up systems.
SIHL 3516 PolySOL Greyback (TSFP13) - a 310µ satin white, grey light stop opaque polyester media formulated solely for the quick, easy and economical production of pop-up displays, offering good scuff resistance so some customers are using it unlaminated.