DigiGuard Standard Laminates:

DigiGuard Standard
80µ PVC 3 year laminate
in ultra gloss, semi-matt and matt textured

Available in satin, textured matt scratch resist and high clarity ultra gloss.
A 3 year outdoor life PVC pressure sensitive laminating film designed to shield digital prints against the effects of UV and mechanical wear and tear.
Will successfully block out 60% of UVa light, significantly extending the colourfastness of the finished print.
The 80µ PVC face films are colour neutral so will not significantly alter the shades of the print being laminated.
The adhesive is a high coat weight photograde clear solvent acrylic that will flow almost immediately with virtually no silvering and will even bond successfully to prints with heavily inked areas.
Most manufacturers recommend that inkjet prints should generally be left between 4 and 24 hours, dependent on the product and the atmospheric conditions, before being laminated.

SV3-60 is a semi-matt 80µ PVC 3 year laminate for internal and external use.

TV3-60 is a matt textured scratch resistant 80µ PVC 3 year laminate for internal and external use.

GV3-60 is an ultra gloss 80µ PVC 3 year laminate for internal and external use.

SV3-60 available in:
50M rolls in widths of 740mm,1040mm, 1300mm, 1350mm and 1560mm.
100M rolls in widths of 1040mm, 1300mm, 1350mm and 1560mm.

TV3-60 available in:
50M rolls in widths of 740mm, 880mm, 1040mm, 1300mm, 1350mm and 1560mm.
100M rolls in widths of 880mm, 1040mm, 1300mm, 1350mm and 1560mm.

GV3-60 available in:
50M rolls in widths of 740mm, 1040mm, 1300mm, 1350mm and 1560mm.
100M rolls in widths of 1040mm, 1300mm, 1350mm and 1560mm.

Buy the metre: non-standard roll lengths are surcharged at 33%.

---