Buy The Linear Meter logo: DigiGuard TP7-20 thick, scratch resistant laminate for pop-up banner stand graphics is available to buy by the linear metre as well as in the standard roll sizes.

DigiGuard Pop-up Laminate:

DigiGuard TP7-20
170 Micron, textured clear rigid PP laminate for pop-ups

A simple solution for laminating roll-ups and pop-ups.

TP7-20 is our clearest and most scratch resistant thick laminate for pop-ups.

This 170µ neutral film and adhesive will minimise any colour shift of your prints and can be used for both flat and curved main panels as well as for small and large radius end panels, so one laminate will do everything on a pop-up.

TP7-20 has excellent rigidity so all the panels will hang beautifully.

Some heat can be used in lamination if required but it is designed to work well with no heat.

This film is PVC free so is easier to recycle than a normal laminate.

SOME RECOMMENDATIONS FOR USE:
Like our other lamination films for pop-ups we recommend the printed and laminated panels are stored flat for a minimum of 30 minutes and ideally for 24 hours before trimming, as trimming too quickly may lead to edge delamination and ultimately to failure of the finished graphic.
We would also recommend using a rotary trimmer to finish the panels.
Regardless of the method used to trim the panel it is vitally important that the cutting blade is sharp.

» Technical Data Sheet.
» Prices and Roll Sizes.

Available in 50M rolls in widths of 1300m, and 100M rolls in widths of 880mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.


For the complete list of our DigiGuard laminates for protecting pop-up and roll-up graphics select the 'DigiGuard Pop-up and Roll-up Laminates' link from the navigation menu on your left, or use the direct links below to see the individual products within this category:

DigiGuard TP7-20 - a 250µ matt textured PVC scratch resistant laminate for internal pop-ups and roll-up prints. Our clearest and most scratch resistant thick laminate for pop-ups. This 170µ neutral film and adhesive will minimise any colour shift of your prints and can be used for both flat and curved main panels as well as for small and large radius end panels, so one laminate will do everything on a pop-up. A simple solution for laminating roll-ups and pop-ups.

DigiGuard TV5-70 - a thicker than normal 125µ matt textured PVC 3 year scratch resistant laminate to give your graphics increased scratch resistance and rigidity for applications such as pop-ups and roll-up displays.