TSFP7 for pop up banner roll-ups and pull up displays is available to buy by the linear metre as well as in 30M rolls in various wide format widths suitable for large format printers.

Pop Up Banners and Roll Up Banner Media:

TSFP8TSFP8 opaque satin finish roll-up banner material is suitable for printing with solvent and latex inks.
200 Micron, opaque satin polyester
with built in light-stop for roll-up displays

TSFP8 pop-up banner with a fully printed colourful graphic hanging perfectly flat in our Altona Two banner stand - the banner stand this opaque satin roll-up is fixed into can be found in our ancillary products section.

Our white back roll-up display film with a built in block out.

Developed for use on both solvent and latex printers.

Available up to 1524mm width.

Our Altona Two banner stands for roll-ups with the printed roll-up display graphic being prepared and then attached to the Altona Two display stand which you can find in our ancillary products section.TSFP8 is a satin, fully opaque and stable polyester with a built in light-stop.

Ideal for the production of pull-up displays.

Product hangs very flat with no distortion and little edge curl from either solvent or latex printers.

The product offers good water and scuff resistance so it can be used unlaminated.

If you need to protect the graphic then one of our DigiGuard standard laminates is recommended, in particular TV3-60. Laminated correctly the finished roll-up will hang flat within 15 minutes.

More detailed information on pop-ups and roll-ups can be found on the Technical Information: Aqueous Inkjet page on this website.

 

» Technical Data Sheet.
» Prices and Roll Sizes.
» Request ICC media profile.

Available in 30M rolls in widths of 914mm, 1067mm and 1524mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.


For the complete list of our media for pop-up and roll-up materials select the 'Pop Up and Roll Up Banner Media' link from the navigation menu on your left, or use the links below to see the individual products within this category:

SIHL 3392 SyntiSOL Greyback (TSOP7) - a fully opaque grey back and our most scuff and scratch resistant one part solution for roll up banner displays.
SIHL 3629 SyntiSOL - a 170µ satin coated, tear resistant polypropylene film for roll-up and pop-up banners with a waterproof coating designed for solvent inks.
TSFP8 - a 200µ fully opaque and stable satin white polyester with built in light stop that is ideal for the production of roll-up displays. It hangs very flat with no distortion and little edge curl, plus good water and scuff resistance so can be used unlaminated.
TSPV9 - Textured white PVC/PET hybrid film with black light stop - an economical solution for fully opaque roll up and pull up displays that can be used unlaminated as product has good tear and scuff resistance.
SIHL 3408 DuraSOL Light - a 220µ satin finish rigid PVC film for roll-up displays that has good rigidity combined with good flatness and a low memory, wateriest, extremely tear resistant and superbly suited for use in various display and roll-up systems.
SIHL 3515 PolySOL Greyback (TSFP7) - a 180µ satin white, grey light stop opaque polyester media formulated solely for the quick, easy and economical production of pop-up displays, offering good scuff resistance.
SIHL 3508 DuraSOL Heavy 450 - a 430µ a satin coated white backed tear resistant rigid PVC film with a waterfast coating for solvent inks with good opacity and tear and scratch resistance. Due to its stiffness, the film is suitable for rigid displays and pop-up systems.
SIHL 3516 PolySOL Greyback (TSFP13) - a 310µ satin white, grey light stop opaque polyester media formulated solely for the quick, easy and economical production of pop-up displays, offering good scuff resistance so some customers are using it unlaminated.