Mactac NoTag 98 S, matt, fine sand textured anti graffiti laminate is available to buy by the linear metre, as well as in full rolls.

Anti-Graffiti Laminates:

Mactac NoTag 98 S
60 Micron, matt, fine sand structured
anti-graffiti laminate, 3 year

NoTag 98 S anti-graffiti laminate from Mactac's IMAGIN range is designed for laminating and protecting large and medium size digital prints.

NoTag 98 S has a matt sand structured finish and is a soft 60μ polymeric, coated on one side with a high tack clear acrylic pressure sensitive adhesive.
The adhesive is protected by a white, easy to remove paper liner.

Resistant to the main staining agents and graffiti paints, Mactac NoTag 98 S is the ideal laminate to protect images against vandalism.

Conformable over flat to slightly curved surfaces.

135gsm white clay coated Kraft paper release liner.

For applications up to 10 years internal and 3 years external use.

» Technical Data Sheet.
» Prices and Roll Sizes.

Available in 25M rolls in widths of 1370mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.

For the complete list of our anti-graffiti laminates select the 'Anti-Graffiti Laminates' link from the navigation menu on your left, or use the links below to see the individual products within this category:

DigiGuard AG2-20 - a thicker 50µ polypropylene film so easier to handle, our lowest cost anti-graffiti film for up to 1 year outdoors. Resistant to most common cleaning solvents and can be used as a low cost dry-wipe laminate. Not suitable for protecting vinyl cut lettering.

Mactac LUV7499 - an 80µ gloss clear PP, eco-friendly anti-graffiti 2 year laminate, for internal and external use.

Mactac PG7034 - 30µ gloss clear PP film for dry-wipe - for internal use only this laminate can be used as dry-wipe film with appropriate marker pens, or as a short-term and low cost anti-graffiti film.

Mactac PG7036 - 36µ gloss clear PET anti-graffiti 3 year outdoor laminate.

Mactac LUV7036 - a U.V. version of Mactac PG7036, this high quality 36µ gloss clear PET anti-graffiti 3 year laminate is formulated for UV prints - it can also be used as a dry-wipe film with appropriate marker pens.

Avery Dennison DOL 4300 - a 23µ gloss clear polyester anti-graffiti, 5 year laminate designed to protect durable images against permanent damage from graffiti, paints and UV light.

Mactac LAG100 - a 60µ satin clear polymeric PVC, anti-graffiti 3-5 year laminate, for internal and external use.

Mactac NoTag 98 S - a 60µ matt, fine sand structured polymeric anti-graffiti laminate - resistant to most staining agents and graffiti paints; the ideal laminate to protect large and medium size digital printed images against vandalism. For up to 3 years external and 10 years internal use.

Mactac ShieldLAM - a 50µ ultra-clear gloss polyurethane, impact and abrasion resistant Boat and Car Wrap, 8 years external laminate, especially designed to improve Mactac TuningFilms.