TSME8 printable mesh with release liner is available to buy by the linear metre from All Print Supplies as well as in full rolls of material.

Mesh:

TSME8TSME8 mesh PVC for solvent printed mesh signage for close up viewing is a Fire Rated product.TSME8 mesh banner material is suitable for printing with solvent inks only.
15/85 fire rated PVC coated polyester mesh
with release liner

TSME8 mesh printed with an artists image of a bowl of flowers.TSME8 - this image shows a close-up view of the mesh with a tape measure to help visualise the proportions of hole size to material.TSME8 is twice as strong and a lower cost version of our TSME11 mesh.

This 270gsm mesh has an easy to remove release liner that allows the product to be printed on all solvent printers.

The 15% hole to 85% film configuration helps make this mesh both strong and ideal for close up viewing.

The 1000D x 1000D warp knitted fabric has a high tensile strength of 915/830 N/2.5cm and a high tear strength of 190/150 N, making it the strongest mesh in our range.

TSME8 printable mesh can be welded or stitched.

TSME8 is fire rated to NFPA 701: 2004.

» Technical Data Sheet.
» Prices and Roll Sizes.
» Request ICC media profile.

Available in 50M rolls in widths of 1371mm and 1600mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.


For the complete list of our mesh films select the 'Mesh' link from the navigation menu on your left, or use the links below to view the individual products within this category:

TSME8 - a 270gsm fire rated, 15% hole to 85% mesh film configuration helps make this mesh ideal for close up viewing - twice as strong and a lower cost version of our TSME11 mesh with an easy to remove release liner that allows the product to be printed on all solvent printers.
TSME11 - a 300gsm fire rated, 30% hole to 70% film configuration makes this mesh better for longer viewing distances - this warp knitted fabric has a high tensile strength and can be welded or stitched.