Buy The Metre

Mesh:

TSME11TSME11 mesh pvc solvent printable signage for long distance viewing is a Fire Rated product.TSME11 mesh banner material is suitable for printing with solvent inks only.
30/70 B1 fire rated PVC coated polyester mesh
with release liner

TSME11 solvent printable PVC mesh shown printed with an artists image of a bowl of flowers.TSME11 - this image shows a close-up view of the printed PVC mesh with a tape measure to help visualise the proportions of hole size to material.TSME11 solvent printable mesh is B1 fire rated.

This 300gsm mesh has an easy to remove release liner that allows the product to be printed on all solvent printers.

The 30% hole to 70% film configuration on TSME11 helps make this mesh better for longer viewing distances.

This warp knitted fabric has a high tensile strength of 720/770 N/2.5cm and a high tear strength of 220/170 N.

TSME11 mesh can be welded or stitched.

» Technical Data Sheet.
» Prices and Roll Sizes.
» Request ICC media profile.

Available in 30M rolls in widths of 1371mm, 1600mm and *2500mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.
(*2500mm wide rolls are not available ‘Buy The Metre’)


For the complete list of our mesh films select the 'Mesh' link from the navigation menu on your left, or use the links below to view the individual products within this category:

TSME8 - a 270gsm fire rated, 15% hole to 85% mesh film configuration helps make this mesh ideal for close up viewing - twice as strong and a lower cost version of our TSME11 mesh with an easy to remove release liner that allows the product to be printed on all solvent printers.
TSME11 - a 300gsm fire rated, 30% hole to 70% film configuration makes this mesh better for longer viewing distances - this warp knitted fabric has a high tensile strength and can be welded or stitched.