DigiGuard laminates for floor graphics are available to purchase by the linear metre as well as in full rolls.

DigiGuard Floor Graphic Laminates:

DigiGuard Floortex FV4-65DigiGuard floor laminate FV4-65 for protection of printed floor graphics is a Fire Rated product. Fire rated to ISO 3795: 1989.
100 Micron, laminating PVC film for floor signage
- Rated to DIN 51130 anti-slip group R10
and has a service life of around 3 months

DigiGuard Floortex FV4-65 laminate for potecting printed floor graphics is shown used here on an internal floor advertisement at a trade show to protect floor prints against heavy pedestrian traffic.A lower cost floor laminate for the protection of floor graphics.
FV4-65 has an R10 rating for slip resistance.

100µ textured PVC face film.

FV4-65 is suitable for both internal and short term external applications and has a service life of around 3 months dependent on traffic.

Fire rated to ISO 3795: 1989 (tested in conjunction with LD2700 Series vinyl).

Available up to 1550mm wide.

» Technical Data Sheet.
» Slip Test Certificate.
» Prices and Roll Sizes.

 

 

 

 

 

 

 

Available in 10M and 50M rolls in widths of 1040mm and 1550mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.


For the complete list of our DigiGuard laminates for floor graphics select the 'DigiGuard Floor Graphic Laminates' link from the navigation menu on your left, or use the direct links below to see the individual products within this category:

Floortex FV4-65 - a 100µ laminating PVC film for floor graphics - Rated to DIN 51130 anti-slip group R10, suitable for both internal and short-term external applications and has a service life of around 3 months.

Floortex FV8-85 - a 200µ laminating PVC film for floor graphics - Rated to DIN 51130 anti-slip group R11, suitable for both internal and short-term external applications and has a service life of around 6 months.