Buy The MetreDigiGuard Pop-up and Roll-up Overlaminates

DIGIGUARD TP5-20 125µ TEXTURED CLEAR RIGID PP LAMINATE FOR ROLL-UPS PP5

DigiGuard TP5-20 125µ textured clear rigid polypropylene overlaminate for roll-ups. TP5-20 is our clearest and most scratch resistant overlaminate for roll-ups. This 125µ neutral film and adhesive will minimise any colour shift of your prints. This film is PVC free and has a water based adhesive making it easier to recycle than a normal PVC overlaminate especially when used in conjunction with our polypropylene printable films.

Available in 100M rolls in widths 880mm, 1040mm and 1300mm
Buy the metre: non-standard roll lengths are surcharged at 33%

DIGIGUARD TP8-30 200µ TEXTURED CLEAR RIGID PP LAMINATE FOR POP-UPS PP5

A simple solution for overlaminating pop-ups. TP8-30 is our clearest and most scratch resistant thick laminate for pop-ups. This 200µ neutral film and adhesive will minimise any colour shift of your prints. TP8-30 can be used for both flat and curved main panels as well as for small and large radius end panels so one overlaminate will do everything on a pop-up. TP8-30 has excellent rigidity so all the panels will hang beautifully. Some heat can be used in lamination if required but it is designed to work well with no heat. Like our other lamination films for pop-ups we recommend the printed and laminated panels are stored flat for a minimum of 30 minutes and ideally for 24 hours before trimming, as trimming too quickly may lead to edge delamination and ultimately to failure of the finished graphic. We would also recommend using a rotary trimmer to finish the panels. Regardless of the method used to trim the panel it is vitally important that the cutting blade is sharp. This film is PVC free so is easier to recycle than a normal overlaminate.

Available in 50M rolls in widths of 1040mm and 1300mm and 100M rolls in a width of 880mm
Buy the metre: non-standard roll lengths are surcharged at 33%

DIGIGUARD SR10 DEEP TEXTURED CLEAR 250µ PVC OVERLAMINATE FOR POP-UPS

SR10 is rigid and very scratch resistant and when used correctly in combination with our front-print polyesters will produce a durable graphic panel.  SR10 features one of the thickest and most rigid face films on the market at 250µ. Similar guidelines on use to TP8-30.

Available in 20M rolls in widths of 880mm and 1245mm and 40M in a width of 880mm
Buy the metre: non-standard roll lengths are surcharged at 33%

DigiGUARD