Mactac CastLAM Matt, matt clear conformable cast laminate for car wraps is available to buy in linear metres as well as the usual full rolls of media - buy only enough of what you need for each job, rather than keep spare material in stock!

Wrap Laminates:

Mactac CastLAM Matt (LF3398)
30 Micron, matt clear, conformable cast PVC laminate
for 3D car wrapping, 5 year

Mactac CastLAM Matt (LF3398), matt clear conformable cast PVC laminate on a vehicle wrap with a printed 'the invincibles' graphic for the German movie promotion.Mactac CastLAM Matt (LF3398) matt clear conformable cast PVC is a 30µ 5 year laminate designed primarily for car wrapping.

This vehicle wrap laminate is suitable for protecting printed graphics over 3D surfaces.

» Technical Data Sheet.
» Prices and Roll Sizes.
» Mactac applications 2016 (PDF catalogue):
Mactac CastLAM Matt (LUV3398).

Click here to watch an excellent video application guide showing you though the entire application process of LF3398 used with Mactac WW100 on a wall graphic project.

 

 

 

 

Available in 50M rolls in widths of 1370mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.


For the complete list of our vehicle wrapping laminates select the 'Wrap Laminates' link from the navigation menu on your left, or use the direct links below to see the individual products within this category:

LG VIZUON™ LP5912G - a gloss polymeric calendered laminate with a permanent adhesive for protection of prints on 2D vehicle wraps. LP5912G is the matched laminate for LD593TM.

Avery Dennison DOL 1460 Gloss Clear and Avery Dennison DOL 1480 Matt Clear - 5 year clear cast laminates for protection of printed wrap graphics on applications over 3D contoured surfaces. The recommended laminates for Avery Dennison MPI 1104 and MPI 1104 EA.

LG VIZUON™ LP809904 - 40µ, 7 year cast laminate for deep recesses in bodywork on vehicle wraps with deep profles; the matched gloss clear PVC laminate for LG printable cast vinyls LD8210 and LD923T.

Mactac CastLAM Gloss (LUV3399) - 30µ ultra gloss clear, conformable cast PVC, 4 year laminate - specifically designed by Mactac to laminate digital UV prints, the high tack adhesive also works well with eco-solvent and latex inks.

Mactac CastLAM Matt (LF3398) - 30µ matt clear, conformable cast PVC, 5 year laminate - designed primarily for car wrapping.

Mactac PERMAfun - a range of three speciality 5 year clear laminates that add sparkle or textured finishes to coloured vinyls and digital prints. Available in; Coarse Wood Grain and Brushed Metal texture effects, and glistening crystal gloss.