Signmakers Fluids: Avery Dennison

Avery Dennison 3D Surface Cleaner
Cleaning fluid (green colour)

3D Surface Cleaner from Avery Dennison for quick and easy cleaning and degreasing in preparation for vinyl graphic applications (green colour fluid). Image shows the 1L bottle with sprayer containing the green cleaning fluid.Avery Surface 3D Cleaner combines the qualities of a detergent with a solvent in the one fluid.

It cleans and degreases in preparation for adhesive application.

It contains no solvents making it both more environmentally friendly than solvent-based
cleaning products and kinder to the substrate.

Specified and tested by application professionals, Avery Surface Cleaner is simply sprayed on to the substrate, left for a few seconds, then removed with the use of a soft, absorbent cloth.

Stage One: Shake the bottle of Avery Dennison 3D Surface Cleaner well and spray onto the surface, ideally 1M diameter at a time.
Stage Two: Wait 30 seconds, then wipe clean with a soft absorbent cloth (do not use a commercial kitchen towel).
Stage Three: Repeat stages 1 and 2 until the area is clean.

» Material Safety Data Sheet (COMING SOON).
» Prices and Fluid / Bottle Sizes.

Available sizes: 1L full bottle with sprayer,
and 1L refil bottles in boxes of 6.


For the complete list of our Removal, Cleaning and Application Fluids select the 'Signmakers Fluids' link from the navigation menu on your left, or use the links below to skip to the individual products within this category:

RAPIDREMOVER Adhesive remover - Quick and easy way to remove old adhesive residue without damage.

RAPIDPREP Cleaning fluid - The quick and easy way to clean and degrease, in preparation for vinyl graphics from RAPIDtac.

Avery Dennison 3D Surface Cleaner - The quick and easy way to clean and degrease, in preparation for vinyl graphic applications over 3D surfaces, from Avery Dennison.

Avery Dennison Flat Surface Cleaner - An effective choice of cleaning fluid for removing day-to-day dirt from substrates during first pass cleaning in preparation prior to applying adhesive vinyls, from Avery Dennison.

RAPIDTAC ORIGINAL Application fluid - Speeds up application times, eliminates bubbling and wrinkling, helps application in cold and hot weather and makes the final result look consistently professional, especially on glass.

RAPIDTAC II Application fluid - is the latest addition to the range and works twice as quickly as the original, as well as now working down to 0ºC.

RAPIDTAC 32oz / 946ml empty spray bottle with nozzle - Empty bottles with spray nozzle and instructions for RAPIDREMOVER, RAPIDPREP, RAPIDTAC ORIGINAL, RAPIDTAC II and RAPIDCLEAR.