Pop-Up Media:

USFP13
330µ satin white opaque universal polyester
with grey light-stop for pop-up displays

A thicker version of USFP7 for pop-ups.
On the HP Z6100 a 3 x 3 pop-up can be printed at 13M² per hour with minimal banding in under 1 hour.
The textured grey backing prevents slippage in both printing and finishing.
This scuff resistant grey backing also prevents fingerprinting and allows for good adhesion of the magnetic tape.
A variety of laminates can be used from our Print Finishing Film section to add protection and rigidity. The most popular laminate currently used is our TV10-30 which is a 250µ deep textured clear rigid PVC laminate that adds rigidity, stiffness and durability while maintaining good levels of clarity.
More detailed usage recommendations are featured on our Technical Information: Aqueous Inkjet page on this website.

 

 

 

 

 

Available in:
5M rolls in widths of 914mm.
30M rolls in widths of 914mm, 1067mm and 1270mm.

---

For the complete list of our papers for aqueous printing select the 'Papers' link from the navigation menu on your left, or use the links below to see the individual products within this category:

FP12 - 300µ matt white front print polyester for pop-ups - for older printers such as the HP5500 and HP5000, a thicker version of FP6.

---