Anti-graffiti laminate DigiGuard AG2-20 print finishing film is available to buy by the linear metre, saving you money as you can buy only enough for what you need, as you need it!

Anti-Graffiti Laminates:

DIGIGUARD AG2-20
50 Micron, gloss clear polypropylene
anti-graffiti 1 year laminate

Anti-grafitti laminate shown being wiped clean - protecting your printed graphics from graffiti!A thicker 50µ polypropylene film than most of the competition makes this easier to handle.

AG2-20 is our lowest cost anti-graffiti film and will help to protect your prints from damage by graffiti for up to 1 year outdoors.

It features a clear 50µ polypropylene film that is resistant to most common cleaning solvents.

AG2-20 is only suitable for flat sided applications on to printed materials, it is not suitable for protecting vinyl cut lettering.

It can be used as a low cost dry-wipe laminate but inks may stain the surface, especially if repeatedly cleaned.
For critical dry-wipe applications we would recommend our DC-50 clear wipe-board film found in the Vinyls for Signmaking: Anti-Graffiti, Blackboard and Wipe-Board Films section of this website.

» Technical Data Sheet.
» Prices and Roll Sizes.

Available in 50M rolls in widths of 1370mm and 1550mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.


For the complete list of our anti-graffiti laminates select the 'Anti-Graffiti Laminates' link from the navigation menu on your left, or use the links below to see the individual products within this category:

DigiGuard AG2-20 - a thicker 50µ polypropylene film so easier to handle, our lowest cost anti-graffiti film for up to 1 year outdoors. Resistant to most common cleaning solvents and can be used as a low cost dry-wipe laminate. Not suitable for protecting vinyl cut lettering.

Mactac LUV7499 - an 80µ gloss clear PP, eco-friendly anti-graffiti 2 year laminate, for internal and external use.

Mactac PG7034 - 30µ gloss clear PP film for dry-wipe - for internal use only this laminate can be used as dry-wipe film with appropriate marker pens, or as a short-term and low cost anti-graffiti film.

Mactac PG7036 - 36µ gloss clear PET anti-graffiti 3 year outdoor laminate.

Mactac LUV7036 - a U.V. version of Mactac PG7036, this high quality 36µ gloss clear PET anti-graffiti 3 year laminate is formulated for UV prints - it can also be used as a dry-wipe film with appropriate marker pens.

Avery Dennison DOL 4300 - a 23µ gloss clear polyester anti-graffiti, 5 year laminate designed to protect durable images against permanent damage from graffiti, paints and UV light.

Mactac LAG100 - a 60µ satin clear polymeric PVC, anti-graffiti 3-5 year laminate, for internal and external use.

Mactac NoTag 98 S - a 60µ matt, fine sand structured polymeric anti-graffiti laminate - resistant to most staining agents and graffiti paints; the ideal laminate to protect large and medium size digital printed images against vandalism. For up to 3 years external and 10 years internal use.

Mactac ShieldLAM - a 50µ ultra-clear gloss polyurethane, impact and abrasion resistant Boat and Car Wrap, 8 years external laminate, especially designed to improve Mactac TuningFilms.