Anti-graffiti laminate for digital UV prints, Mactac LUV7499 is available to buy by the linear metre, saving you money as you can buy only enough for what you need, as you need it! Also available in full rolls.

Anti-Graffiti Laminates:

Mactac LUV7499
80 Micron, gloss clear PP anti-graffiti laminate
Internal & External, 2 year

Anti-grafitti laminate shown being wiped clean - protecting your printed graphics from graffiti!Mactac LUV7499 is an eco-friendly laminate based on 80µ polypropylene film coated on one side with a clear emulsion acrylic adhesive.

The adhesive is protected by a white paper release liner that provides complete visual inspection of the product, easy liner removal and a distortion-free adhesive surface.
As such this product is free of chlorine and phtalates.

This print finishing laminate is designed for protection of photographic images and digital prints.

Suitable for indoor and short term outdoor applications.

It does not influence the pH level of substrate to which it is applied and it can be used to protect images against vandalism thanks to its anti-graffiti performance.

» Technical Data Sheet.
» Prices and Roll Sizes.
» Mactac applications 2016 (PDF catalogue): Mactac LUV7499.

Available in 50M rolls in widths of 1370mm.
Buy the metre: non-standard roll lengths are surcharged at 33%.

For the complete list of our anti-graffiti laminates select the 'Anti-Graffiti Laminates' link from the navigation menu on your left, or use the links below to see the individual products within this category:

DigiGuard AG2-20 - a thicker 50µ polypropylene film so easier to handle, our lowest cost anti-graffiti film for up to 1 year outdoors. Resistant to most common cleaning solvents and can be used as a low cost dry-wipe laminate. Not suitable for protecting vinyl cut lettering.

Mactac LUV7499 - an 80µ gloss clear PP, eco-friendly anti-graffiti 2 year laminate, for internal and external use.

Mactac PG7034 - 30µ gloss clear PP film for dry-wipe - for internal use only this laminate can be used as dry-wipe film with appropriate marker pens, or as a short-term and low cost anti-graffiti film.

Mactac PG7036 - 36µ gloss clear PET anti-graffiti 3 year outdoor laminate.

Mactac LUV7036 - a U.V. version of Mactac PG7036, this high quality 36µ gloss clear PET anti-graffiti 3 year laminate is formulated for UV prints - it can also be used as a dry-wipe film with appropriate marker pens.

Avery Dennison DOL 4300 - a 23µ gloss clear polyester anti-graffiti, 5 year laminate designed to protect durable images against permanent damage from graffiti, paints and UV light.

Mactac LAG100 - a 60µ satin clear polymeric PVC, anti-graffiti 3-5 year laminate, for internal and external use.

Mactac NoTag 98 S - a 60µ matt, fine sand structured polymeric anti-graffiti laminate - resistant to most staining agents and graffiti paints; the ideal laminate to protect large and medium size digital printed images against vandalism. For up to 3 years external and 10 years internal use.

Mactac ShieldLAM - a 50µ ultra-clear gloss polyurethane, impact and abrasion resistant Boat and Car Wrap, 8 years external laminate, especially designed to improve Mactac TuningFilms.