Signmakers Fluids: RAPIDtac

RAPIDPREP
Cleaning fluid (orange colour)

Rapid Prep cleaning fluid from RAPIDTAC for quick and easy cleaning and degreasing in preparation for vinyl graphics (orange colour fluid). Image shows the 3 x available bottle sizes (40oz, 30oz and 3.7L bottles).The quick and easy way to clean and degrease, in preparation for vinyl graphics.

RAPIDPREP will clean and degrease the surface properly.

It will only leave compatible residues and will ensure wax, silicone and oils are not left on the surface.

It is non-flammable and non-hazardous.

Stage One: Shake the bottle of RAPIDPREP well and spray onto the surface, ideally 1M diameter at a time.
Stage Two: Wait 30 seconds, then wipe clean with a paper towel (do not use a commercial kitchen towel or cloth rag).
Stage Three: Repeat stages 1 and 2 until the area is clean.

» Material Safety Data Sheet.
» Prices and Fluid / Bottle Sizes.

Available sizes: 2.02oz (60ml) full bottle with sprayer, 32oz (946ml) full bottle with sprayer,
and 1 US Gallon (3.7L) refil bottles in boxes of 4, or in singles
RAPIDtac empty spray bottle with the nozzle. RAPIDTAC spray nozzle is shown in picture.

 

Also available: RAPIDPREP empty spray bottle - 32oz (946ml) with spray nozzle.

 


For the complete list of our Removal, Cleaning and Application Fluids select the 'Signmakers Fluids' link from the navigation menu on your left, or use the links below to skip to the individual products within this category:

RAPIDREMOVER Adhesive remover - Quick and easy way to remove old adhesive residue without damage.

RAPIDPREP Cleaning fluid - The quick and easy way to clean and degrease, in preparation for vinyl graphics from RAPIDtac.

Avery Dennison 3D Surface Cleaner - The quick and easy way to clean and degrease, in preparation for vinyl graphic applications over 3D surfaces, from Avery Dennison.

Avery Dennison Flat Surface Cleaner - An effective choice of cleaning fluid for removing day-to-day dirt from substrates during first pass cleaning in preparation prior to applying adhesive vinyls, from Avery Dennison.

RAPIDTAC ORIGINAL Application fluid - Speeds up application times, eliminates bubbling and wrinkling, helps application in cold and hot weather and makes the final result look consistently professional, especially on glass.

RAPIDTAC II Application fluid - is the latest addition to the range and works twice as quickly as the original, as well as now working down to 0ºC.

RAPIDTAC 32oz / 946ml empty spray bottle with nozzle - Empty bottles with spray nozzle and instructions for RAPIDREMOVER, RAPIDPREP, RAPIDTAC ORIGINAL, RAPIDTAC II and RAPIDCLEAR.