TLV20 and TLV21 etch glass films for solvent printing

2 brand new additions to our range of media for eco and true solvent printers. Both these films can be printed on all the target printers and are designed to add real impact to window graphics. TLV20 is a matt textured decorative etch film and TLV21 looks like rice-paper. Both these products will help you to offer more creative solutions to your customers.

TSSC15 solvent satin artist canvas

Another addition to our solvent range of media. TSSC15 is a 15mil / 340gsm satin finished water resistant artist canvas designed for the latest solvent printers.

TSSC15 dries quickly and can be folded over frames without cracking. It offers outstanding print quality and is ideal for the fine art market. It is currently available 762mm and 1371mm wide.

UWP12 latex based matt wallpaper for solvent.

UWP12 is a 12 mil, or 230gsm, latex based matt wallpaper for solvent printing. It offers both high print quality with minimum wet expansion and was designed for applications such as customising the interiors of offices, homes and retail outlets.

If you would like a printed A4 sample to see, then email sales@allprint.co.uk or phone the office on 01753 696977. Alternatively you can purchase a trial roll on a strict 'sale-or-return' basis.

TSMP9 matt indoor poster paper

TSMP9 is a 180gsm instant drying poster paper for internal work only. The print quality is excellent.

TSPPS6 opaque satin poster paper

TSPPS6 is a very opaque, barrier coated satin white poster paper developed for the latest range of solvent printers. TSPPS6 is a 140gsm wet strength paper, which allow it to be used as an outdoor poster paper and its resistance to temperature and humidity also allows it to be used in environments with high humidity and extreme temperature variations such as launderettes etc. The print results are outstanding on a variety of solvent printers with superb colour definition.

TSPPS6 was formulated primarily for outdoor advertising, billboards, posters etc. The print quality on TSPPS6 is so good that it is also used for internal applications where some additional water, scratch and fade resistance is required. A solvent print on TSPPS6 will typically last for 2 – 3 months outdoors unlaminated. Lamination will dramatically extend the life of the print and our recommended overlaminate for TSPPS6 is our GV3-90 ultra gloss polymeric PVC overlaminate. Drying times are slower on papers than our self-adhesive vinyl or banner products so care should be taken when handling prints straight after printing. It is important to let the prints dry for a couple of hours before finishing work on them. A forced air dryer such as a fan heater can be used to speed up drying times if required.

TSPPG9 premium opaque gloss poster paper

TSPPG9 is 210gsm and is a thick, glossy and premium version of TSPPS6 above.

TSBBS5 blue backed satin poster paper

TSBBS5 is a 125gsm totally opaque, barrier coated satin white poster paper with a blue backing developed for the latest range of solvent printers. TSBBS5 has excellent wet strength properties, which allow it to be used as an outdoor poster paper. The blue backing is designed to prevent show-through of previous posters. Its resistance to temperature and humidity also allows TSBBS5 to be used in environments with high humidity and extreme temperature variations such as launderettes etc. The print results are outstanding on a variety of solvent printers with superb colour definition. It was designed primarily for outdoor advertising, billboards, posters etc. TSBBS5 is the most opaque poster paper in the range and will act as a cover-all paper.

LM50000 (was TSOW7) perforated one-way (1.5mm hole size 50/50) vision film: for longer viewing distances

LM50000 is a self-adhesive Contra Vision licensed perforated PVC film for the creation of see through graphics. This film features a medium tack solvent based removable adhesive, which can be removed from most substrates within 1 year of application. The 1.5mm hole size 50/50 perforation light permeable construction allows 50% of light to pass through the image whilst still ensuring a high quality graphic image. This hole ratio makes LM50000 the choice for graphics that will be viewed from longer distances. Ideal for window advertising. The perforated film ensures that the design on one side is not visible from the other side. LM50000 also reduces solar heat gain, which can lead to stress cracks in glazing units. It is also an effective security or safety measure.

We strongly recommend using our Lucky High Tack application tape when fitting to windows to avoid the graphic distorting when being fitted. Overlamination is not recommended but if absolutely required then our GV3-90 ultra gloss polymeric PVC overlaminate is the best choice.

Now also available in 5M long rolls.

LM5300B perforated one-way (1.5mm hole size 30/70) vision film: for closer viewing distances

LM5300B is a self-adhesive Contra Vision licensed perforated PVC film for the creation of see through graphics. This film features a medium tack solvent based removable adhesive, which can be removed from most substrates within 1 year of application. The 1.5mm hole size 30/70 perforation light permeable construction allows only 30% of light to pass through the image ensuring a high quality graphic image. This hole ratio makes LM5300B the better choice for graphics that will be viewed from shorter distnces. Ideal for window advertising. The perforated film ensures that the design on one side is not visible from the other side. LM5300B also reduces solar heat gain, which can lead to stress cracks in glazing units. It is also an effective security or safety measure.

We strongly recommend using our Lucky High Tack application tape when fitting to windows to avoid the graphic distorting when being fitted. Overlamination is not recommended but if absolutely required then our GV3-90 ultra gloss polymeric PVC overlaminate is the best choice.

Now also available in 5M long rolls.

SW150 & SC150 white and clear gloss static PVC films for solvent

SW150 is a white self-cling film on a 130gsm release liner. The highly plasticised film will adhere to any smooth surface such as glass or painted metal. The lack of an adhesive means that there will be no adhesive residue when the printed graphic is removed. SW150 is suitable for internal solvent prints on smooth surfaces such as glass, painted metal etc.

SC150 is the clear version of SW150.It is a clear self-cling film on a 130gsm release liner.and is generally printed in reverse. SC150 can be backed up with a thin white self-adhesive PVC to add punch to the image.

With both these films it is vital to ensure that the glass or painted surface is cleaned prior to application and that the prints are completely dry to prevent any ink transfer on to the application surface.