Pop-up & Roll-up Displays
We have been supplying solutions for the manufacture of exhibition graphic panels for several years. Our aim has always been to provide a trouble-free 1 or 2 part solution to the problems of producing pop-up display panels and banner stands. We believe that there is no single perfect solution in the market place so we offer a broad range of products that can be matched together to suit your particular requirements.
Common to all are our 2 main scratch resistant cold overlaminates SR10 (300 micron) and SR3 / TV3-6 (80 micron). These protective laminates are tough, durable and can be applied with absolute minimal silvering of the image.
Our in-house applications centre allows us to reproduce these types of graphics on a wide range of printer platforms to ensure that the products are fit for purpose. Delivery anywhere in the UK mainland can be by noon the next day.
The products detailed on this page are a snap shot only. For the full range, price lists and printed samples:
Sales Office
Tel: 00 44 (0) 1753 696977
Fax: 00 44 (0) 1753 567733
Email: sales@allprint.co.uk
|
Two polyester based products designed solely for dye-based printers.The same quick drying inkjet coating gives outstanding print results.
FP12 is our 300µ rigid front print stop-lite pop-up media for the main panel.
FP6 is our 125µ rigid front print stop-lite popup media for end panels or for pullups...........Read more
- Both are back coated to ensure 100% opacity
- Static has been fully eliminated ensuring trouble-free printing and correct length registration
- Both can be laminated and trimmed out within minutes of printing if speed is required
- FP12 is rigid and hangs perfectly when laminated with SR10
- FP6 is the perfect solution for pull ups. When laminated with SR3 and suspended it hangs perfectly with no edge curl.
- We believe the FP6 and SR3 combination will give your customers the flattest lying pull-ups ever
"My major client asked me to produce a roll-up stand made from the various products available. They selected the FP6 / SR3 combination from all print supplies because of the stunning image quality and the way it hung flat with no edge curl. This order alone was worth six figures to us."
|
Products for producing popup & rollup displays
 For dye based printers such as the HP & Encad range we offer 2 front print polyester films with stop-lite coatings on the reverse.
FP6 is the thinner product at 125µ and is either for pull-up displays, particularly spring-loaded retractable systems or for the curved end panels of pop-up displays.
FP12 is thicker at 300µ and is mainly used for the main pop-up panels.
Our primary cold seals for pull-ups an pop-ups are both textured, high clarity PVC's with solvent acrylic adhesives for maximum bonding and immediate flow-out to reduce silvering through air entrapment. They feature a tough and scratch resistant face. SR3/ TV3-60 is 80µ thick for use in pull-ups
SR10 is 300µ thick and is the overlaminate for pop-ups. |
resistant cold overlaminate for pop-up displays